Anchor Farm, Trent, Dorset
Tel 01935 850750

Spare parts 

We offer a range of spares for both our fan range and pedestals. We also have a fully qualified NIC EIC electrician in house and now offer an electrical contracting service to carry out the installation of our own kit and that purchased from other manufacturers. Services include installation of control panels, building and crop ventilation fans, lighting and bespoke control fans. Our electrical engineer will be able to advise and ensure that all fans that you may be using are running on the correct length of extension lead. It is imperative that the correct length of lead is used as incorrect lengths can result in low voltage burn out of motors and capacitors.

TEC Motors

TEC Motors

Evans and Pearce are delighted to be an authorized supplier for TEC electric motors. We have secured some very competitive prices for the TEC range. If you are looking for prices on electric motors please give us a chance to quote.

We hold a limited stock at our Sherborne depot, if we don’t have the motor you require then we can have it sent on a next day delivery to mainland UK addresses.

In order for us to quote accurately please supply us with the following information:

Single or Three phase
Pole (motor speed/rpm)

Bearing kit

Bearing kit

Bearing kit for VBW7 and VBW9.

Motor Capcitors

Motor Capcitors

Motor capacitors for VBL6/3 and VBW7. 

Replacement Impeller

Replacement Impeller

Available for the VBW7 and VBW9.

Extension cables for fans

Extension cables for fans

Custom extension leads for single and 3 phase applications from 10m to 50m.

VBW7 16 amp plug upgrade

VBW7 16 amp plug upgrade

13 amp to 16 amp plug upgrade for VBW7 fans. 

Polycool reducing cone

Polycool reducing cone

450-150mm reducing cone and available as a 450-200mm cone. 

Polycool extension pipe

Polycool extension pipe

Available in both 150 mm and 200 mm in 1 and 2 meter lengths. 

Polycool Coupler

Polycool Coupler

150 mm and 200 mm coupler for Polycool top pipe. 

End caps

End caps

End caps for both Polycool and Metalcool for 150 mm and 200 mm pipes. 

Metalcool extension pipes

Metalcool extension pipes

Available as 1 m or 2 m lengths. 

Metalcool coupler

Metalcool coupler

150 mm and 200 mm couplers. 

Metal end caps

Metal end caps

The same as the plastic end caps but made from galvanized metal. 

Spiral wound pipe parts

Spiral wound pipe parts

We stock a range of couplers, reducers and bends.

Spiral wound coupler

Spiral wound coupler

300mm-150mm reducer. 

Spiral wound ducting reducing cone

Spiral wound ducting reducing cone

Available from 300-100mm down to 200-100mm.

UK and European Dealer Locator

Click here to search for dealers

Related Products